Multipurpose Additive For Gasoline

Multipurpose Additive for Gasoline ZX-L1-02 – High-Performance Fuel Additive for Improved Engine Efficiency. Our Multipurpose Additive for Gasoline enhances fuel efficiency, reduces engine wear, and ensures smoother engine performance. Perfect for improving gasoline quality and extending engine life.

When the engine is running, the temperature of the fuel injector is around 100℃, and the temperature of the intake valve is between 200 and 300℃. At such temperatures, unstable components in the fuel are highly prone to oxidation condensation reactions, generating gum and carbon deposits that deposit on the intake valves and fuel injectors. Advanced high-turbocharged engines and those using GDI direct fuel injection technology are more likely to produce carbon deposits. The sediment accumulated on the intake valve will cause a reduction in the cross-sectional area of the intake channel, a decrease in intake efficiency, a drop in power, and in severe cases, it will make the valve act slowly and fail to close tightly. Carbon deposits on fuel injectors can lead to poor fuel injection, a decline in fuel atomization quality, and make it difficult for the fuel to be completely burned after entering the combustion chamber. This results in engine starting difficulties, unstable idling, increased fuel consumption, and deterioration of exhaust emissions. These conditions are particularly prominent in winter.
- Clean the carbon deposits in the engine to reduce ignition failures and unstable idle speed caused by carbon deposits.
- Protect the engine and effectively lubricate the fuel system;
- One can can provide an extremely excellent cleaning effect for the entire fuel system.
- Enhance engine power and fuel economy;

Mixture of PIB-monoamine, polyether, friction modifier and corrosion inhibitor

The above listed data represent average values at the time of going to press of this technical information. They are intended as a guide to facilitate handling and cannot be regarded as specified data.. Specified product data are issued as a separate product specification.

Main function:

Multipurpose Additive for Gasoline ZX-L1-02 is an efficient fuel additive that can improve the combustion efficiency of fuel, reduce engine wear, and effectively enhance engine performance. This additive is particularly suitable for various gasoline engines, especially in situations where it is necessary to improve fuel economy and extend the service life of the engine.

Experimental data shows that after adding 0.5% Multipurpose Additive for Gasoline, fuel efficiency has increased by 8% and engine noise has decreased by 5%. This additive has been widely applied in a variety of automobiles and industrial equipment, performing exceptionally well.

Performance and Application

Multipurpose additive for gasoline ZX-L1-02 is a multipurpose additive for gasoline. The additive package is based on Beyond unique polyisobutene amine detergent which is combined with synthetic carrier fluids.

Multipurpose additive for gasoline ZX-L1-02 efficiently controls and removes vehicle intake system deposits.

Multipurpose additive for gasoline ZX-L1-02 contains a very effective friction modifier, which reduces friction in the engine and helps to further reduce fuel consumption.

In addition Multipurpose additive for gasoline ZX-L1-02 contains a very effective corrosion inhibitor which protects tanks and fuel lines against corrosion. A demulsifier provides optimized water phase separation in storage tanks.

The dosage of the additive package depends on the severity of the gasoline and the keep-clean/clean-up requirements. Recommended are treat levels of 450-1000mg/kg to achieve maximum fuel economy benefits.

This additive is widely used in various types of gasoline engines, including automobiles, motorcycles, ships and other small mechanical equipment. It is particularly suitable for occasions where there are high requirements for fuel economy and engine life.

Storage and handling

Multipurpose additive for gasoline ZX-L1-02 can be stored and handled at Temperature from -20℃ to 50 ℃. Carbon steel, stainless steel and fluorinated polyethylene can be used for storage tanks and injection systems. Polyethylene, rubber, polystyrene and polypropylene should be avoided. Multipurpose additive for gasoline ZX-L1-02 can be stored for at least for 1 year under normal storage conditions.

Packaging

in bulk or in barrel, per clients' request

Safety

When using this product, the information and advice given in our safety data sheet should be observed. Due attention should also be given to the precautions necessary for handling chemicals.

Note

The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processes from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, not the solubility of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change with prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.

Hot Tags: multipurpose additive for gasoline, China multipurpose additive for gasoline manufacturers, suppliers, factory, ddp delivery service, Neutralization Corrosion Inhibitor, Acidification Corrosion Inhibitor 90 , oilfield chemical delivery analysis, Alkyl Pyridines Acetate, cfi container shipping