General information
ZX-P4-12 pour point depressant (referred to as PPD) is designed to reduce the pour point and viscosity of crude oils during the delivery in pipelines.
Application of Acrylic Ester Pour Point Depressant for Crude Oil ZX-P4-11 will reduce problems associated with pipeline transport due to high pour point and viscosity of the crude oil being carried, making pipeline transport possible or more economical.
Composition
Acrylic Ester
Product properties
|
Appearance |
Brown liquid |
|
Odor |
Slight odor |
|
Density |
0.870~0.920 g/cm3 at 20 ℃ |
|
Viscosity |
≤100 mPa.s ( 25 ℃ ) |
|
Pour Point |
≤15 ℃ |
|
Flash Point (close cup) |
≥33 ℃ |
|
Water solubility |
Insoluble |
|
Fat solubility |
Soluble with most organic solvents |
The manufacturing process and quality checks as well as provided quality control documents are strictly based on our ISO-9001 Quality Control Standard.
Application
Normally, wax crude oils with wax content above 5% are sensitive to PPD. Heating facility is usually required to heat the oil dosed with PPD product to a certain temperature called treatment or beneficiary temperature, generally 10C above WAT (Wax Appearance Temperature). This is done to re-dissolve wax crystals, if there are, in the oil, then PPD molecules will be given chances to co-crystallize with the wax crystals, which re-precipitate from the oil. Wax crystals crystallized with PPD product will form in a weaker or looser structure resulting in reduction in pour point and viscosity of the crude oils.
Acrylic Ester Pour Point Depressant for Crude Oil ZX-P4-12 should be injected continuously. Usually a dosage of 500 to 15000 ppm is sufficient.
Storage and Handling
Acrylic Ester Pour Point Depressant for Crude Oil ZX-P4-12 will be stable and keep its potency for three years if stored in ventilated, dry place with temperature range -10C ~ +50C in the tightly sealed container.
Standard pumps and mild steel containers can be used for injection. Notes the pump seal must be resistant to aromatic solvents.
When handing PPD ZX-P4-12, protective gloves and protective work clothing should be worn.
After skin contact, wash immediately with soap and water and rinse thoroughly. If skin irritation continues, consult a doctor.
After eye contact, the opened eye should be rinsed for 15 minutes under running water, after a doctor has to be consulted.
Additional information concerning first aid fir fighting measures, transport information san regulations is given in the Material Safety Data Sheet, with is available upon request.
Packing
200L steel drum or 1000L IBC or per clients' request
Hot Tags: acrylic ester crude oil ppd, China acrylic ester crude oil ppd manufacturers, suppliers, factory, Crude Oil Pour Point Depressant, Acrylic Ester Crude Oil PPD, EVA type Crude Oil PPD, EVA g Polyacrylate Crude Oil PPD