General
This series of products are mainly high-molecular compounds formed by the polymerization of initiators with different functional groups such as polyamines, polyols, diepoxides, and various resins with propylene oxide and ethylene oxide. Oxalkylated Resin Demulsifier ZX-D2-08 is an oxakylated resin in high boiling hydrocarbon solvent. ZX-D2-08 concentrate is an oxalkylated resin in high boiling hydrocarbon solvent.
Our oxygen alkylation resin demulsifier ZX-D2-08 is specially designed for oil fields. It can efficiently separate oil-water emulsions under extreme conditions and enhance the production efficiency of oil fields. Its high efficiency and stability can reduce equipment wear and maintenance costs.
Composition
Oxalkylated polymer.
Product properties
| Appearance by visual |
Yellow to brown viscous liquid |
| Density (DIN 51757) | 1.02 g/cm3 at 20 ℃ |
| Viscosity (DIN ISO 53015) | 21000 mPa*s at 20 ℃ |
| Pour Point (ISO 3016) |
7℃ |
| Flash Point (DIN 51758) |
60℃ |
| Solubility (at 30 ℃) |
Insoluble in water Soluble in aromatic hydrocarbon solvents |
Application
Field of application
ZX-D2-08 concentrate is a concentrated emulsion breaker intermediate used for dehydration and desalting of crude oil emulsions. ZX-D2-08 concentrate act as both, a treater and a water dropper. It is effective across a wide range of application on its own or as part of multi-component formulations.
Advantages:
1, High-efficiency demulsification: Rapidly and effectively separate oil-water emulsions to enhance production efficiency.
2, Wide applicability: It is suitable for various oil fields and petroleum refining processes, with stable performance.
3, Environmental protection and safety: Complies with international environmental protection standards and is non-toxic and harmless.
4, Improve economic benefits: Reduce maintenance costs and extend the service life of equipment.
Dosage Rate
Depending on the oil quality, ZX-D2-08 concentrate is typically applied in dose rates of 100-500ppm.
Blending Temperature
If the pour point of the oil allows, an injection at room temperature is feasible when homogenized thoroughly by stirring. For optimized blending conditions and thus lower dosing rates, a temperature between 30-50℃ is recommended.
Storage
When stored outdoors in the original sealed drums, ZX-D2-08 concentrate will remain almost indefinitely usable. Hot and cold spells have no deteriorative influence. Solidified product should be warmed-up and re-mixed.
Packing
200L steel drums (55 US gal) or road tankers; non returnable.
Safety and handling
ZX-D2-08 concentrate is intended for technical use only. Avoid physical contact. During transport in road tankers, the product is heated to temperatures up to 80℃ and may cause burns if spilled on the skin. Consult the safety Data Sheet for further details.
Hot Tags: oxalkylated resin demulsifier, China oxalkylated resin demulsifier manufacturers, suppliers, factory, demulsifying brand recognition, demulsifying failure, demulsifying profit, demulsifying export, demulsifying brand image, demulsifying identity