General
CO2 corrosion inhibitor ZX-C2-03 is a kind of film formation corrosion inhibitor, which is composed of home-grown composite pyridine quaternary ammonium salt as main ingredients, other synergist and surfactant. It can be applicable for high salinity saltwater system anti-corrosion the oilfield injection CO2 displacing oil technical process. By the process, high partial CO2 control carbon steel metal corrosion, and it has a protection for carbon steel metal corrosion caused by oil well produced water with high CO2 and chloride ion, carbonate ion high salinity. It has an excellent comprehensive performance and good protective effect in all of oil, gas, and water phase. Meanwhile, it can be able to inhibit corrosion and hydrogen embrittlement caused by H2S. And also, it has a good compatibility with other oilfield chemistry agent.
Composition
Composite pyridine quaternary ammonium salt, synergist and surfactant
Product properties
|
Appearance |
Reddish brown liquid |
|
Density |
1.03-1.08 (g/cm3, 20℃) |
|
Solubility |
Freely soluble in water |
|
Freezing point |
<= -15 ℃ |
|
PH (1% aqueous solution) |
5.0 - 7.0 |
|
Corrosion rate |
<= 0.076 (g/m2.h) |
Application
Site Application
CO2 Corrosion Inhibitor ZX-C2-03 is applicable for corrosion control under high partial pressure CO2 and high salinity saltwater system corrosion environment in the oilfield CO2 displacing oil technical process, as well as corrosion control for oilfield wastewater system with certain partial CO2.
Instructions
The concentration of corrosion inhibitor addition is 100mg/Lin the injection CO2 displacing oil technical process. But in the oil well produced water system, the concentration of CO2 corrosion inhibitor addition is 500mg/L. it has a better effect with cooperatively using de-oxidant in closed aerobic system. Dilute corrosion inhibitor 1-2 times by tap water and then use it.
Product characteristic
Good corrosion inhibition properties effect on series of high partial pressure CO2.
Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage.
Packing
200L steel drum or 1000L plastic IBC
Safety and handling
C2O Corrosion Inhibitor ZX-C2-03 is industrial use only.
Skin Exposure: Wash skin right away with lots of water and soap if there is any contact. Contact a doctor if the irritation doesn't go away.
Exposure of the eyes: If eyes come into contact with it, rinse thoroughly with water for at least fifteen minutes. Using your fingers to keep the eyes apart, ensure proper flushing. Contact a doctor if the irritation doesn't go away.
Exposure by Inhalation: Get out into fresh air immediately. Provide oxygen if needed. Make an appointment with a doctor.
Oral Exposure: If ingested, rinse mouth thoroughly with water as soon as possible, as long as the person is awake. Make an appointment with a doctor.
Hot Tags: CO2 Corrosion Inhibitor, China CO2 Corrosion Inhibitor manufacturers, suppliers, factory, High performance CO2 Corrosion Inhibitor, High performance Chemical Cleaning Corrosion Inhibitor, Oilfield Reinjection Water Corrosion Inhibitor, Pipeline Corrosion and Scale Inhibitor, Oilfield Corrosion Inhibitor, CI For Oil Gas Gathering and Transportation