Heavy Pour Point Depressant For AGO VGO ETC

Heavy Pour Point Depressant For AGO VGO ETC

ZX-P4-10 is a heavy oil flow improver which functions by modifying the oils wax crystal structure. ZX-P4-10 may be used in all heavy oils including heavy distillates, #6 oil, AGO, VGO, and crude oil.
Send Inquiry
Description
General

 

General information

Heavy oil PPD ZX-P4-10 is a heavy oil flow improver which functions by modifying the oils wax crystal structure. ZX-P4-10 may be used in all heavy oils including heavy distillates, #6 oil, AGO, VGO, and crude oil.

 

Product benefits

  • Depresses the pour point of crude, residual, and other heavy oils;
  • Prevents the growth of wax crystals;
  • Enables oils to be pumpable below their pour point
  • Easy to handle due to low viscosity;

product-859-858

Composition

 

EVA polymer in organic solvent.

 

Product properties

 

Appearance Yellow to brown, clear to slightly hazy liquid
Specific gravity at 30℃ 0.875 g/cm3 at 30 ℃
Viscosity cSt at 40℃ 35
Pour Point 24 ℃
Flash Point (close cup) ≥ 25 ℃
 
Application

 

Feeding and Dosage

 

Preferred application of Heavy oil PPD ZX-P4-10 is directly into the fuel as far upstream as possible by means of proportioning pump. To assure maximum performance, Heavy oil PPD ZX-P4-10 should be added when fuel is hot. We can assist in determining the optimum treating temperature. Dosage will vary depending upon the oil and desired flow improvement, but will normally be from 100-2000ppm.

We can assist you in selecting the most cost effective dosage.

product-800-755

Storage and Handling

We recommends that Heavy oil PPD ZX-P4-10 be maintained at a temperature between 35-40℃ in order to ensure adequate pumpability and adequate mixing.

When handing Heavy oil PPD ZX-P4-10, protective gloves and protective work clothing should be worn.

After skin contact, wash immediately with soap and water and rinse thoroughly. If skin irritation continues, consult a doctor.

After eye contact, the opened eye should be rinsed for 15 minutes under running water, after a doctor has to be consulted.

Additional information concerning first aid fir fighting measures, transport information san regulations is given in the Material Safety Data Sheet, with is available upon request.

 

Packing

200L steel drum or 1000L IBC or per clients' request.

 

Hot Tags: heavy pour point depressant for ago vgo etc, China heavy pour point depressant for ago vgo etc manufacturers, suppliers, factory, EVA type Crude Oil PPD, Acrylic Ester Crude Oil PPD, Crude Oil Pour Point Depressant, EVA g Polyacrylate Crude Oil PPD