Antistatic Agent

In recent years, the hydrorefined oil treatment is generally low (<500ppm) and ultra-low sulfur (<50ppm), in this process to remove the natural conductive characteristics in the fuel, resulting in low conductivity. In the process of production, storage, loading and unloading, use, and the friction between the storage container or oil pipe wall is easy to produce very dangerous static electricity, accumulation to a certain extent will produce electrostatic sparks, ignite explosive mixture caused explosion and fire, leading to major disasters. The effective way to solve this problem is to use fuel oil Antistatic Agent ZX-RF-07.

Polysulfone / polyamine ash-free Antistatic Agent ZX-RF-07 mainly use the interaction between polar groups contained in molecules and charges to inhibit and leak charges, thus increasing the conductivity of fuel oil.

Antistatic Agent ZX-RF-07, ASA type gasoline and diesel antistatic agent does not contain any metal components and can be burned together with gasoline and diesel in the engine without causing damage to the engine. ASA type of gasoline and diesel antistatic agent is very obvious, and the conductivity of fuel oil after adding antistatic agent increases with the increase of storage time. Adding 3-10ppm to gasoline and diesel can meet the requirements (the conductivity added value of fuel oil is greater than 300 p S/m).

Product characteristic

1. Easy soluble in fuel oil, adapted to naphtha, gasoline, diesel, heavy diesel, kerosene, paint, paint, etc.

2. Add a small The dose is small, can quickly respond and improve the conductivity of fuel oil.

3. Oil energy is compatible with other commonly used oil additives and does not affect its performance index.

Dosage Rate

The recommended additional dose is generally 1ppm - 5ppm. Generally the sensitivity of fresh diesel oil is better, while the sensitivity of long-term stored oil products is worse. 2ppm ASA antistatic agent is added to diesel, the conductivity of diesel can be increased by more than 300 pS / m, and 0. 5 - 2 ppm ASA antistatic agent can be improved by no less than 500 pS / m.

Susceptibility of Oil

Generally the sensitivity of fresh diesel oil is better, while the sensitivity of long-term stored oil products is worse. 2ppm ASA Antistatic Agent ZX-RF-07is added to diesel, the conductivity of diesel can be increased by more than 300 pS / m, and 0. 5 - 2 ppm ASA Antistatic Agent ZX-RF-07 can be improved by no less than 500 pS / m.

Using instruction

1. Add the oil directly or add the dilution, and mix well. Because the added dose is small, the oil to be mixed is generally diluted to 1% and then added to the oil.

2. Use a metering pump into the finished tank through a static mixer.

3. In the oil tank truck transportation, firstly add the oil antistatic agent in a certain proportion to the oil truck, and then load the oil.

4. Because when the antistatic agent is added for the first time, the container will adsorb, and the added amount should be increased appropriately.

Packing

25L iron barrel packaging with net weight of 20kg; it can be packaged according to user needs.

Storage

Ashless Antistatic Agent ZX-RF-07 should be stored in a cool, dry and ventilated warehouse to avoid the sun and rain.

Safety and handling

Avoid violent impact and collision during the transportation process.

The substance may hurt eyes and cause discomfort when it touches with the skin. If skin comes into touch with it, wash the affected area thoroughly with plenty of water right away. If the eyes are contacted, seek medical assistance right away and thoroughly wash with water for at least 15 minutes.

For further information, see the Product MSDS.

Hot Tags: Antistatic Agent, China Antistatic Agent manufacturers, suppliers, factory, Powerful Diesel Fuel Stabiliser, Ashless Antistatic Agent, Fuel Additive, Diesel Cetane Improver, Methylcyclopentadienyl Manganese Tricarbonyl