Description
Flow improver concentrate middle distillates ZX-P3-12-1 is a polymer composition in higher boiling hydrocarbons. It is intended for improving the cold flow properties of middle distillate. Both the CFPP and pour point of diesel and light heating oils can be considerably reduced. The product also improves paraffin wax crystal dispersancy in middle distillates when stored below the cloud point. This is achieved by a further reduction in crystal size and prevention of was agglomeration, which in most cases allows the diesel to be stored for several days below cloud point without significant sedimentation.
Composition
Polymer composition in high boiling hydrocarbons.
Product properties
| Physical Data | Approx. |
| Appearance by visual | Milky white to yellowish viscous liquid |
| Density (DIN 51757) | approx. 0.92 g/cm³ at 60℃ |
| Viscosity (ISO 3219) | approx. 110mPs at 140℃ |
| Flash point (ISO 2719) | approx. 80℃ |
| Pour point (ISO 3016) | approx. 18℃ |
| Solubility @ 30℃ | Totally soluble in aromatic solvents (e.g. xylene, naphthas), stability test in aliphatic-rich solvent advisable (e.g. kerosene). Insoluble in water and methanol. |
Applications
Advantages:
Our Flow Improver Concentrate for Middle Distillates is designed to ensure smooth flow and prevent blockages in diesel fuels during cold weather. This additive reduces pour points, preventing wax crystallization and ensuring uninterrupted flow, even in temperatures as low as -30°C.
"The product has been tested under ASTM D2500 standards, showing a 30% improvement in cold filter plugging point (CFPP) reduction in diesel fuels."
"Effective at temperatures as low as -35°C, the concentrate ensures the smooth flow of middle distillates even under the harshest winter conditions."
Our customers in the cold regions of Northern Europe have reported smoother diesel transport and reduced fuel blockages since using our Flow Improver Concentrate.
Unlike traditional cold flow improvers, our concentrate offers a 50% higher reduction in pour point, ensuring reliable fuel flow even in extremely cold climates.
Field of Application
Flow improver concentrate middle distillates ZX-P3-12 is specifically designed for use in premium winter diesel. Because of its broad spectrum of activity, it is effective in a wide range of oils including middle distillates having a narrow boiling range and a short tail, in wider range distillates with an FBP below 375℃, and in arctic type distillates where the FBP is below 230℃ (ASTM D 86 Distillation). Good paraffin wax crystal dispersancy in diesel and light heating oils allows their prolonged storage below cloud point without significant wax sedimentation.
Flow improver concentrate middle distillates ZX-P3-12 is a flow improver concentrate and meant to be diluted prior dosing into middle distillates. Suitable solvent such as solvent naphtha may be used in blend ration of 2:1 and higher.
Dosage Rate
According to the characteristics of the particular middle distillate and dilution factor of the product, 100-500ppm of the diluted product is usually sufficient to achieve the desired CFPP and/or Pour Point response. Higher dosage rates up to 1000ppm may also be used while observing the recommended blending conditions.
Blending temperature
Flow improver concentrate middle distillates ZX-P3-12 concentrated should be dosed diluted as gas oil temperatures down to approximately 30℃ depending on the characteristics of the gas oil into which it is doped. The additive temperature at the injection point should not be below 40℃. At lower temperatures, a further dilution is recommended. The middle distillate should be at least 10℃ above its cloud point at the time of additive injection.
Storage
A temperature of 60℃ (100-125℉)is recommended for storing the product. In closed containers Flow improver concentrate middle distillates ZX-P3-12 concentrate may be stored for at least two years.
Important: On bringing a tank back into service after prolonged storage at lower temperatures, the additive should first be heated and homogenized before use.
Packaging
The product is delivered in a Heated road tanker/tank container or 200L steel drums, or per clients' requests.
Safety and handling
The product is intended for technical use only. Avoid physical contact. Use gloves and goggles for protection. During transportation in road tankers the product is heated to temperatures up to 80℃ (175℉) may cause burns if spilled on the skin. Materials spilled on the skin should be washed off with soap and plenty of water. If splashed in the eye rinse with copious quantities of water. Keep containers closed when not in use. Avoid contact with water. Keep away from sparks and open flame. Do not smoke. Empty containers may hold gases that form explosive mixtures with air. Consult the Safety Data Sheet for further details.
Hot Tags: flow improver concentrate for middle distillates, China flow improver concentrate for middle distillates manufacturers, suppliers, factory, cfi export license, ddp import, cfi port of loading, ddp paperwork, cfi shipping charges, Diesel Cold Flow Improver