General
Cationic Quick-setting Slurry Asphalt Emulsifier ZX-BP-05 A1 is a unique cationic quick-set asphalt emulsifier that can be used in micro-surfacing and slurry seal spplications. Cationic Quick-setting Slurry Asphalt Emulsifier ZX-BP-05 should be tested in parallel with its sister product Cationic Quick-setting Slurry Asphalt Emulsifier ZX-BP-05 A2 to determine the best fit for the targeted asphalt and aggregate.
Emulsion Characteristics:
- Emulsion-to-aggregate compatibility
- Excellent storage stability
- Good mixing
Product properties
|
Item |
Indicator |
|
Appearance |
Brown liquid |
|
Flashing point |
190℃ |
|
Poure point |
12℃ |
|
Density |
1 |
|
Viscosity(cps) |
9500 |
Remark: All measurements are conducted at 25.
Application
Cationic Quick-setting Slurry Asphalt Emulsifier ZX-BP-05 A1 Application
|
Emulsified asphalt type |
Cationic slow cracking and fast setting emulsified asphalt |
Micro surface Emulsified asphalt |
|
Asphalt(wt%) |
62 |
62-63 |
|
FF-A1 (wt%) |
1.2-1.8 |
1.5-2.0 |
|
Latex(wt%) |
0-3 |
3-4 |
|
Ph (with HCl) |
1.5-2.5 |
1.5-2.5 |
|
Water(wt%) |
till/到100 |
till/到100 |
Typical formulatin by weight.
Usage and methods
The amount of Cationic Quick-setting Slurry Asphalt Emulsifier ZX-BP-05 A1 needs to be optimized according to the actual materials used in the project and the specific temperature conditions during site construction.
Package and storage
Cationic Quick-setting Slurry Asphalt Emulsifier ZX-BP-05 A1 is usually stored at room temperature of 20-25℃. Evenly heating is good for pumping, but Cationic Quick-setting Slurry Asphalt Emulsifier ZX-BP-05 A1 cannot be stored above 60℃ for long term.
Safety and handling
- Barrel emulsified asphalt: Usually sold in 20-liter or 200-liter barrels. This packaging method is suitable for small sites or temporary construction sites because the barrel emulsified asphalt is easy to use, can be directly poured into the mixture for construction and can be sealed for storage, effectively extending storage life.
- Bagged emulsified asphalt: Emulsified asphalt is packaged in bags for better convenience and portability. This packaging method is suitable for use on site and can reduce transportation costs and improve construction efficiency.
- Canned emulsified asphalt: Emulsified asphalt is stored in less polluting metal tanks. The common sizes are 5 liters and 18 liters. Canned emulsified asphalt has good sealing, corrosion resistance, ETC, suitable for small works, infrastructure repair, greening WORKS, ETC.
- Storage environment: Emulsified asphalt should be stored in a cool, dry and well-ventilated place, away from direct sunlight and the influence of extreme temperatures.
- Transportation and storage: Different types of products should be stacked separately, protected from direct sunlight and rain, with good ventilation. The storage temperature should be controlled between 5-40℃
- Sealing performance: Whether in barrels, bags or cans, ensure that the sealing performance is intact and avoid moisture, direct sunlight and extreme temperatures
Hot Tags: medium crack asphalt emulsifier liquid, China medium crack asphalt emulsifier liquid manufacturers, suppliers, factory